A corn puff machine turns corn grits into light, crunchy puffed snacks in one continuous pass. SN Engineering Works builds these machines at its workshop in Noida, Uttar Pradesh, and has made food processing machinery since 2012.
Each machine is configured for your snack, output and available space, with installation and operator training from our team.
| Parameter | Specification |
|---|---|
| Capacity | 120 kg/hr |
| Material | SS (Stainless Steel) |
| Frequency | 50 Hz |
| Country of Origin | Made in India |
A corn puff machine is an extruder that cooks corn grits with water under heat and pressure and pushes the mix through a die. As the hot mix leaves the die, the sudden drop in pressure makes it puff up into a light, crunchy piece. A cutter then trims it to length.
Corn is rich in starch, and starch is what swells when it is cooked under pressure and released. That is why corn grits give a crisp, golden puff with an even texture. Rice and other grains can be puffed too, but corn is the most common starting point for snack makers.
Grits of a similar size cook evenly. A mix of very coarse and very fine grits cooks unevenly and gives patchy puffs.
Water is added before or during extrusion, and the amount matters. Too little gives hard, dense puffs, and too much gives soft, chewy ones. Keep the amount the same from batch to batch.
Check the grits for husk, stones and lumps before they go into the hopper. Foreign matter can damage the die and spoil a whole batch.
| What you see | What it often points to |
|---|---|
| Hard, dense puffs | Too little moisture, or too low a temperature in the barrel. |
| Dark or burnt colour | Barrel temperature set too high. |
| Chewy, soft puffs | Too much moisture, or not enough drying afterwards. |
| Uneven lengths | An unsteady feed, or cutter speed that does not match the output. |
Our listed Corn Puff Machine has a rated output of 120 kg per hour. At that rate, an eight-hour shift gives about 960 kg, before stoppages and cleaning. Work out how much you plan to sell each day and check that one machine can supply it. If not, ask about a larger machine or a second one.
Drying, seasoning and packing come after the extruder, so plan space for them too. Our puff extruder page explains how the extruder fits into the line.
Our corn puff machines are built in Sector 8, Noida, by a team that has made food processing equipment since 2012. Tell us your snack, output and space, and we will recommend a setup. Once the machine arrives, our team installs it at your site and trains your operators.
A corn puff machine is an extruder that cooks corn grits with water under heat and pressure and pushes the mix through a die. The mix puffs up as it leaves the die, and a cutter trims it into pieces.
Corn grits are the usual raw material. The grits should be of an even size and clean, and the right amount of water is added to cook them.
Hard, dense puffs usually point to too little moisture or too low a barrel temperature. Check the water added to the grits and the temperature settings, and ask a technician if the problem continues.
The Corn Puff Machine shown on this page is approximately Rs 3.3 Lakh per piece. Add the cost of drying, seasoning and packing equipment to estimate the full line.